Instruments and controls
129
The following functions are available:
Stolen vehicle assistance
Diagnostic report
● Lock or unlock vehicle.
If the vehicle is stolen, report the theft
The vehicle automatically transmits
to the authorities and request OnStar
diagnostic data to OnStar which
● Honk horn or flash lights.
stolen vehicle assistance. Use any
sends a monthly email report to you
● Check fuel level, engine oil life
phone to call an advisor. Find the
and your preferred workshop.
and tyre pressure (only with tyre
respective OnStar phone number on
Notice
pressure monitoring system).
our country-specific website.
The workshop notification function
● Send navigation destination to
OnStar can provide support in
can be disabled in your account.
the vehicle, if equipped with a
locating and recovering the vehicle.
built-in navigation system.
The report contains the status of key
Theft alert
operating systems of the vehicle like
● Locate vehicle on a map.
When the anti-theft alarm system is
engine, transmission, airbags, ABS,
● Manage Wi-Fi settings.
triggered, a notification is sent to
and other major systems. It also
OnStar. You are then informed about
To operate these functions, download
provides information on possible
this event by text message or email.
the app from App Store® or
maintenance items and tyre pressure
Google Play™ Store.
Restart prevention
(only with tyre pressure monitoring
By sending remote signals, OnStar
system).
Remote control
can prevent the vehicle from
To look at the information in greater
If desired, use any phone to call an
restarting once it has been turned off.
detail, select the link within the email
advisor, who can remotely operate
and log in to your account.
specific vehicle functions. Find the
On-demand diagnostics
respective OnStar phone number on
At any time e.g. if the vehicle displays
Destination download
our country-specific website.
a vehicle message, press Z to
A desired destination can be directly
The following functions are available:
contact an advisor and ask to
downloaded to the navigation system.
complete a real-time diagnostic check
● Lock or unlock vehicle.
Press Z to call an advisor and
to directly determine the issue.
describe the destination or point of
● Provide information on the
Depending on the results, the advisor
interest.
vehicle location.
will provide further support.
● Honk horn or flash lights.
130
Instruments and controls
The advisor can look up any address
Notice
Find the privacy policy in your
or point of interest and directly send
In any case, if the vehicle is disposed
account.
the destination to the built-in
of, sold or otherwise transferred,
navigation system.
immediately inform OnStar about
Software updates
the changes and terminate the
OnStar may remotely carry out
OnStar settings
OnStar service on this vehicle.
software updates without further
notice or consent. These updates are
OnStar PIN
Vehicle location
to enhance or maintain safety and
To have full access to all OnStar
The vehicle location is transmitted to
security or the operation of the
services, a four-digit PIN is required.
OnStar when service is requested or
vehicle.
The PIN has to be personalised when
triggered. A message on the Info-
These updates may concern privacy
first talking to an advisor.
Display informs about this
issues. Find the privacy policy in your
transmission.
To change the PIN, press Z to call an
account.
advisor.
To activate or deactivate the
transmission of the vehicle location,
Account data
press and hold j until an audio
An OnStar subscriber has an account
message is heard.
where all the data is stored. To
The deactivation is indicated by the
request a change of the account
status light flashing red and green for
information, press Z and talk to an
a short period of time and each time
advisor or log in to your account.
the vehicle is started.
If the OnStar service is used on
Notice
another vehicle, press Z and request
If the transmission of the vehicle
that the account be transferred to the
location is deactivated, some
new vehicle.
services are no longer available.
Notice
The vehicle location always remains
accessible to OnStar in the case of
an emergency.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Lighting
131
Lighting features
139
Exterior lighting
Lighting
Centre console lighting
139
Entry lighting
139
Light switch
Exit lighting
139
Exterior lighting
131
Battery discharge protection
140
Light switch
131
Automatic light control
132
High beam
132
High beam assist
132
Headlight flash
133
Headlight range adjustment
133
Headlights when driving
abroad
134
Daytime running lights
134
LED headlights
135
Hazard warning flashers
136
Turn and lane-change signals . 136
Turn light switch:
Front fog lights
136
AUTO : automatic light control
Rear fog light
137
switches automatically
Parking lights
137
between daytime running
Reversing lights
137
light and headlight
Misted light covers
137
8
: sidelights
Interior lighting
138
9
: headlights
Instrument panel illumination
control
138
When switching on the ignition,
Interior lights
138
automatic light control is active.
Reading lights
139
Control indicator 8 3 115.
Sunvisor lights
139
-------------------------------------------------------------------------------------------------------------------------------------------------------------
132
Lighting
Tail lights
Automatic headlight activation
High beam assist 3 135.
Tail lights are illuminated together
During poor lighting conditions the
with low/high beam and sidelights.
headlights are switched on.
High beam assist
The headlights are also switched on
This feature allows high beam to
Automatic light control
if the windscreen wipers have been
function as the main driving light at
activated for several wipes.
night and when vehicle speed
exceeds 25 mph.
Tunnel detection
It switches automatically to low beam
When a tunnel is entered headlights
when:
are switched on immediately.
● The camera or a sensor in the
windscreen detects the lights of
oncoming or preceding vehicles.
High beam
● The vehicle speed drops below
12 mph.
● It is foggy or snowy.
● Driving in urban areas.
If there are no restrictions detected,
When the automatic light control
the system switches back to high
function is switched on and the
beam.
engine is running, the system
switches between daytime running
lights and headlights automatically
depending on the external lighting
conditions and information given by
the rain sensor system.
Push lever to switch from low to high
Daytime running light 3 134.
beam.
Pull lever to deactivate high beam.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
133
Lighting
Activation
If a headlight flash is activated when
Headlight range adjustment
the high beam is on, the high beam
assist will be deactivated.
Manual headlight range
If a headlight flash is activated when
adjustment
the high beam is off, the high beam
assist will remain activated.
The latest setting of the high beam
assist will remain after the ignition is
switched on again.
Headlight flash
To activate the headlight flash, pull
lever.
The high beam assist is activated by
Pulling lever deactivates high beam.
pushing the indicator lever twice with
a speed above 25 mph.
LED headlights 3 135.
The green control indicator f
To adapt headlight range to the
illuminates continuously when the
vehicle load to prevent dazzling: turn
assist is activated, the blue one 7
thumb wheel ? to required position.
illuminates when high beam is on.
0 : front seats occupied
Control indicator f 3 115.
1 : all seats occupied
2 : all seats occupied and load
Deactivation
compartment laden
3 : driver's seat occupied and load
Push indicator lever once. It is also
compartment laden
deactivated when front fog lights are
switched on.
Dynamic automatic headlight
levelling 3 135.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
134
Lighting
Turn adjuster element on each
3. Switch on ignition.
Headlights when driving
headlight housing 1/2 turn with a
4. After approx. five seconds the
abroad
size six hexagon key anticlockwise to
control indicator f starts flashing
The asymmetrical headlight beam
set to right-hand traffic mode. To
and an acoustic signal sounds.
extends visibility at the edge of the
adjust, insert the key in the guide as
Control indicator f 3 115.
road at the passenger side.
shown in the illustration. Alternatively,
However, when driving in countries
a Phillips head screwdriver
Every time the ignition is switched on,
where traffic drives on the opposite
size three can be used for setting.
f flashes as a reminder for approx.
side of the road, adjust the headlights
four seconds.
To reset to left-hand traffic mode, turn
to prevent dazzling of oncoming
For deactivation, operate the same
adjuster elements on both headlight
traffic.
procedure as described above. f will
housings 1/2 turn clockwise.
not flash when function is
Vehicles with halogen headlight
Vehicles with LED headlight
deactivated.
Daytime running lights
Daytime running light increases
visibility of the vehicle during daylight.
They are switched on automatically
when the engine is running.
The system switches between
daytime running lights and headlights
automatically, depending on the
lighting conditions. Automatic light
control 3 132.
There is a white adjuster element on
1. Key in ignition switch.
the rear of each headlight housing.
2. Pull turn signal lever and hold
(headlight flash).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Lighting
135
LED headlights
Cornering lights
High beam assist
LED lighting system includes:
3 132
● LED headlights for low and high
Reverse parking function
beam
● cornering lights
To assist driver's orientation when
parking, both corner lights and
● town light
reversing light illuminate when
● high beam assist
On tight bends or when turning off,
headlights are on and reverse gear is
● reverse parking function
depending on the steering angle or
engaged. They remain illuminated for
● eco mode
the indicator light signal, an additional
a short time after disengaging reverse
left or right reflector is switched on
gear or until driving faster than
● dynamic automatic headlight
which illuminates the road in the
4 mph in a forward gear.
levelling
direction of travel. It is activated up to
Eco mode
LED headlights for low and
a speed of 43 mph.
highbeam
If the vehicle stops, e. g. due to traffic
Town light
lights, an energy saving mode for
LED headlights for low and high beam
headlights is activated.
ensure better visibility under all
conditions.
Dynamic automatic headlight
Operation is the same as for halogen
levelling
headlights.
To prevent oncoming traffic from
Light switch 3 131, high beam 3 132,
being dazzled, headlight levelling is
headlight flash 3 133, headlights
automatically adjusted based on
Activated automatically at a speed up
when driving abroad 3 134.
vehicle inclination information.
to approx. 34 mph. In situations with
Automatic light control 3 132.
exterior ambient light both cornering
Headlights when driving abroad
lights are switched on with reduced
intensity. The light is wide and
3 134.
symmetrical.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
136
Lighting
Fault in LED headlight system
When a trailer is connected, turn
Turn and lane-change
signal flashes six times when
When the system detects a failure in
signals
pressing the lever until resistance is
the LED headlight system, f
felt and then releasing.
illuminates and a warning is displayed
Move the lever to the resistance point
in the Driver Information Centre.
and hold for longer indication.
Switch the turn signal off manually by
Hazard warning flashers
moving the lever to its original
position.
Front fog lights
lever up
: right turn signal
lever down : left turn signal
If the lever is moved past the
resistance point, the turn signal is
switched on constantly. When the
Operated by pressing ¨.
steering wheel moves back, the turn
signal is automatically deactivated.
In the event of an accident with airbag
deployment the hazard warning
For three flashes, e.g. when changing
flashers are activated automatically.
lanes, press the lever until resistance
Operated by pressing >.
is felt and then release.
Light switch in position AUTO:
switching on front fog lights will switch
headlights on automatically.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Lighting
137
Rear fog light
Parking lights
Reversing lights
The reversing light comes on when
the ignition is on and reverse gear is
selected.
Misted light covers
The inside of the light housing may
mist up briefly in poor, wet and cold
weather conditions, in heavy rain or
after washing. The mist disappears
quickly by itself; to help switch on the
headlights.
Operated by pressing r.
When the vehicle is parked, the
parking lights on one side can be
Light switch in position AUTO:
activated:
switching on rear fog light will switch
headlights on automatically.
1. Switch off ignition.
Light switch in position 8: rear fog
2. Move turn signal lever all the way
light can only be switched on with
up (right parking lights) or down
front fog lights.
(left parking lights).
The vehicle rear fog light is
Confirmed by a signal and the
deactivated when towing a trailer or a
corresponding turn signal control
plug is connected with the socket, e.
indicator.
g. when a bicycle carrier is used.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
138
Lighting
Interior lighting
Interior lights
Rear courtesy lights
During entry and exit of the vehicle,
Instrument panel
the front and rear courtesy lights
illumination control
automatically switch on and then off
after a delay.
Notice
In the event of an accident with
airbag deployment the courtesy
lights are turned on automatically.
Front courtesy light
Illuminate in conjunction with the front
courtesy light depending on rocker
switch position.
Brightness of the following lights can
be adjusted when the exterior lights
are on:
● instrument panel illumination
● Info-Display
● illuminated switches and
operation elements
Operate rocker switch:
Turn thumb wheel A and hold until
w
: automatic switching on
the desired brightness is obtained.
and off
press u : on
press v
: off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Lighting
139
The following lights will additionally
Reading lights
Lighting features
switch on when the driver's door is
opened:
Centre console lighting
● illumination of some switches
Spotlight incorporated in the interior
lighting comes on when headlights
● Driver Information Centre
are switched on.
● door pocket lights
Entry lighting
Exit lighting
The following lights switch on if the
Welcome lighting
key is removed from the ignition
Headlights, tail lights, number plate
switch:
lights, instrument panel light, interior
● interior lights
lights and the light pipes in doors and
Operated by pressing s and t in
● instrument panel light (only when
FlexConsole are switched on for a
it is dark)
front and rear courtesy lights.
short time by unlocking the vehicle
with the radio remote control. This
● light tubes in doors
function works only in the dark and
● number plate lights (puddle
Sunvisor lights
facilitates locating the vehicle.
lights)
Illuminates when the cover is opened.
The lighting switches off immediately
They will switch off automatically after
when the ignition key is turned to
a delay and will be activated again if
position 1 3 150.
the driver's door is opened.
Activation or deactivation of this
Path lighting
function can be changed in the
Settings menu in the Info-Display.
Headlights, tail lights and number
Vehicle personalisation 3 124.
plate lights illuminate the surrounding
The settings can be saved for the key
area for an adjustable time after
being used 3 21.
leaving the vehicle.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
140
Lighting
Activating
The settings can be saved for the key
being used 3 21.
Battery discharge protection
To prevent discharge of the vehicle
battery when the ignition is switched
off, some interior lights are switched
off automatically after some time.
1. Switch off ignition.
2. Remove ignition key.
3. Open driver's door.
4. Pull turn signal lever.
5. Close driver's door.
If the driver's door is not closed, the
lights switch off after two minutes.
Exit lighting is switched off
immediately if the turn signal lever is
pulled while the driver's door is open.
Activation, deactivation and duration
of this function can be changed in the
Settings menu in the Info-Display.
Vehicle personalisation 3 124.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст