Vauxhall Combo (2014 year). Manual — part 5
-------------------------------------------------------------------------------------------------------------------------------------------------------------
72
Instruments and controls
Control indicators in the instrument cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
73
Rapid flashing: failure of a turn signal
Fastening the seat belt 3 39.
Generic warning
light or associated fuse, failure of turn
9 illuminates yellow.
signal light on trailer.
9 Warning
Depending on model variant, control
Bulb replacement 3 132, Fuses
indicator 9 may illuminate
Fasten seat belt before each trip.
3 138.
independently or in conjunction with
Turn signals 3 90.
In the event of an accident, people
Æ, t, Z or
r
not wearing seat belts endanger
If 9 illuminates together with I; stop
their fellow occupants and
engine immediately and seek the
Seat belt reminder
themselves.
assistance of a workshop.
Seat belt reminder for front
To deactivate the seat belt reminder,
Simultaneously a warning message
seats
consult a workshop. Reactivation of
may be displayed in the Driver
X for driver's seat and/or front
the warning chime for seat belt
Information Centre 3 79.
passenger seat illuminates or flashes
reminder can be done via the Driver
9 also illuminates if the fuel cut-off
red.
Information Centre 3 79.
switch is triggered, or if a fault is
detected in the engine oil pressure
Illuminates
Note
sensor. Consult a workshop.
The volume of the warning chime
When the ignition has been switched
can also be adjusted via the Driver
Fuel cut-off system 3 85.
on, control indicator X illuminates
Information Centre 3 79.
briefly if driver's seat belt and/or front
passenger seat belt is not engaged. A
Turn signal
Airbag and belt tensioners
warning chime also sounds for a few
v illuminates red.
2 or 3 flashes green.
seconds.
When the ignition is switched on, the
Flashes
Flashes
control indicator illuminates for
A turn signal or the hazard warning
During driving X will flash and a
approx. 4 seconds. If it does not
flashers are activated.
warning chime will sound for
illuminate, does not go out after
90 seconds until the front seat belts
4 seconds or illuminates whilst
are fastened.
driving, there is a fault in the airbag
-------------------------------------------------------------------------------------------------------------------------------------------------------------
74
Instruments and controls
system. Seek the assistance of a
* permanently illuminates yellow.
Malfunction indicator light
workshop. The airbags and belt
Airbag deactivation 3 45.
Z illuminates or flashes yellow.
pretensioners may fail to trigger in the
event of an accident.
Illuminates when the ignition is
9 Danger
switched on and extinguishes shortly
Deployment of the belt pretensioners
after the engine starts.
or airbags is indicated by continuous
Risk of fatal injury for a child using
illumination of v.
a child restraint system together
Illuminates when the engine is
with activated front passenger
running
9 Warning
airbag.
Fault in the emission control system.
Risk of fatal injury for an adult
Have the cause of the fault
The permitted emission limits may be
person with deactivated front
remedied immediately by a
exceeded. Seek the assistance of a
passenger airbag.
workshop.
workshop immediately.
Charging system
Flashes when the engine is
Belt pretensioners, airbag system
3 38, 3 41.
p illuminates red.
running
Fault that could lead to catalytic
Illuminates when the ignition is
converter damage. Ease up on the
Airbag deactivation
switched on and extinguishes shortly
accelerator until the flashing stops.
after the engine starts.
* illuminates yellow.
Seek the assistance of a workshop
With the front passenger airbag
Illuminates when the engine is
immediately.
activated:
running
When the ignition is switched on, *
Stop, switch off engine. Battery is not
Brake system
illuminates for approx. 4 seconds,
charging. Engine cooling may be
R illuminates red.
flashes for another 4 seconds and
interrupted. The brake servo unit may
Illuminates when the parking brake is
then extinguishes.
cease to be effective. Seek the
released if the brake fluid level is too
assistance of a workshop.
With the front passenger airbag
low 3 130.
deactivated:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
75
Illuminates for a few seconds after the
fault in the Hill start assist. Seek the
9 Warning
ignition is switched on. The system is
assistance of a workshop to have the
ready for operation when the control
fault remedied.
Stop. Do not continue your
indicator extinguishes.
The Electronic Stability Program
journey. Consult a workshop.
If the control indicator does not
(ESP) control indicator x may also
extinguish after a few seconds, or if it
illuminate 3 76 in conjunction with
Illuminates if the brake vacuum servo
illuminates while driving, there is a
Z.
fails; the brake pedal becomes stiff
fault in the ABS. The brake system
when pressed. The brake system
Depending on model variant, 9 will
remains operational but without ABS
remains operational however,
illuminate as an alternative if control
regulation.
assistance will be reduced. The
indicator Z is not present. A warning
steering may also require
Antilock brake system 3 112.
message may also be displayed in
considerably more effort when
the Driver Information Centre 3 79.
turning.
Upshift
Generic warning 9 3 73.
Illuminates after the ignition is
[ or Ò illuminates in the Driver
Hill start assist 3 113.
switched on if the parking brake is
Information Centre 3 79 when
applied 3 112.
gearshifting is recommended to
Ultrasonic parking assist
improve fuel economy.
Brake pad wear
r
illuminates yellow.
F illuminates yellow.
Fault in system
Hill start assist
The front brake pads are worn, seek
or
Z illuminates yellow.
the assistance of a workshop
Fault due to sensors that are dirty or
Illuminates when the ignition is
immediately.
covered by ice or snow
switched on and extinguishes shortly
after the engine starts.
or
Antilock brake system
If the control indicator does not
(ABS)
extinguish after a few seconds, or if it
illuminates while driving, there is a
u illuminates yellow.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
76
Instruments and controls
Interference due to external sources
Illuminates
Caution
of ultrasound. Once the source of
A fault in the system is present.
interference is removed, the system
Continued driving is possible. Driving
If engine coolant temperature is
will operate normally.
stability, however, may deteriorate
too high, stop vehicle, switch off
Have the cause of the fault in the
depending on road surface
the ignition. Danger to engine.
system remedied by a workshop.
conditions.
Check coolant level.
Depending on version, 9 will
Have the cause of the fault remedied
If the control indicator remains on,
illuminate as an alternative if control
by a workshop.
seek the assistance of your
indicator
r
is not present. A
Electronic Stability Program (ESP)
workshop.
warning message may also be
3 114, Traction control system/Anti-
displayed in the Driver Information
Slip Regulator (ASR) 3 113.
Engine coolant temperature gauge
Centre 3 79.
3 69.
Generic warning 9 3 73.
Engine coolant
Ultrasonic parking assist 3 116.
Preheating
temperature
! illuminates yellow.
$ illuminates red.
Electronic Stability
Preheating is activated. Only
Illuminates for a few seconds after the
Program
activates when outside temperature
ignition is switched on.
is low.
x illuminates or flashes yellow.
If control indicator $ illuminates in
conjunction with a message in the
Flashes
Driver Information Centre, the coolant
Diesel particle filter
The system is actively engaged.
temperature is too high. Seek the
[
illuminates yellow.
Engine output may be reduced and
assistance of a workshop.
The diesel particle filter requires
the vehicle may be braked
Driver Information Centre 3 79.
cleaning.
automatically to a small degree.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
77
Continue driving until
1. Depress clutch.
Change engine oil
[
extinguishes. If possible, do not
2. Select neutral gear (or move
allow engine speed to drop below
selector lever to N).
Diesel engines with diesel
2000 rpm.
3. Move out of the flow of traffic as
particle filter
quickly as possible without
I flashes red.
Illuminates
impeding other vehicles.
The diesel particle filter is full. Start
Illuminates when the ignition is
cleaning process as soon as
4. Switch off ignition.
switched on and extinguishes shortly
possible.
after the engine starts.
9 Warning
The engine oil life monitor lets you
Diesel particle filter 3 106, Stop-start
system 3 103.
know when to change the oil. Control
When the engine is off,
indicator I will flash, together with a
considerably more force is needed
message in the Driver Information
Engine oil pressure
to brake and steer. During an
Centre, to indicate that engine oil life
Autostop the brake servo unit will
I illuminates red.
has been diminished and the oil
still be operational.
needs changing.
Illuminates when the ignition is
Do not remove key until vehicle is
switched on and extinguishes shortly
Based on driving conditions, the
stationary, otherwise the steering
after the engine starts.
interval at which an oil change will be
wheel lock could engage
indicated can vary considerably.
unexpectedly.
Illuminates when the engine is
Depending on model variant, I may
running
flash in the following ways:
Check oil level before seeking the
assistance of a workshop 3 127.
■ for 1 minute every 2 hours, or
Caution
■ for 3 minute cycles with I off for
intervals of 5 seconds.
Engine lubrication may be
interrupted. This may result in
damage to the engine and/or
locking of the drive wheels.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
78
Instruments and controls
The warning will be repeated every
Illuminates
Immobiliser
time the engine is started, until the
Level in fuel tank is too low. Refuel
d illuminates yellow.
engine oil is changed and the service
immediately 3 120.
display is reset. Seek the assistance
Fault in the immobiliser system. The
Never run the tank dry.
of a workshop.
engine cannot be started.
Catalytic converter 3 107.
Service display 3 70.
Stop-start system
Flashes
Low engine oil level
Fault in fuel system.
Æ illuminates yellow.
y illuminates red.
Have the cause of the fault remedied
A fault is present in the system.
by a workshop.
Illuminates when the ignition is
Have the cause of the fault remedied
switched on and extinguishes shortly
Fuel gauge 3 68.
by a workshop.
after the engine starts.
Depending on version, 9 will
If the control indicator does not
illuminate as an alternative if control
Drain fuel filter
extinguish after a few seconds, or if it
indicator Æ is not present. A warning
z illuminates yellow.
illuminates while driving, the engine
message may also be displayed in
oil level is insufficient.
Illuminates when the ignition is
the Driver Information Centre 3 79.
switched on and goes out shortly after
Check oil level before seeking the
Generic warning 9 3 73.
the engine starts.
assistance of a workshop 3 127.
Stop-start system 3 103.
Illuminates when the engine is
Low fuel
running
Exterior light
$ illuminates or flashes yellow.
Indicates the presence of water in the
8 illuminates green.
diesel. Seek the assistance of a
Illuminates for a few seconds after the
workshop immediately.
The exterior lights are on 3 88.
ignition is switched on.
Exterior light failure
µ illuminates yellow.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
79
One or more of the exterior lights is
The system is on.
Information displays
faulty 3 132.
Cruise control 3 115.
Depending on version, 9 will
Driver Information Centre
illuminate as an alternative if control
Door open
indicator µ is not present. A warning
message may also be displayed in
\ illuminates red.
the Driver Information Centre 3 79.
A door or the tailgate is open.
Generic warning 9 3 73.
High beam
C illuminates blue.
Illuminated when high beam is on and
during headlight flash 3 88.
Fog light
The Driver Information Centre is
> illuminates green.
located in the instrument cluster
between the speedometer and
The front fog lights are on 3 90.
tachometer. Two versions are
available; a Standard version
Rear fog light
r illuminates yellow.
The rear fog light is on 3 91.
Cruise control
m illuminates green.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
80
Instruments and controls
■ Transmission display 3 108
Press the SETq button:
■ Stop-start system indicator 3 103
■ once to access the settings menu
■ Vehicle messages 3 85
■ press again to access a menu
option and submenu options
■ Trip computer 3 86
■ after changes have been made,
Selecting menus and options
briefly press again to confirm a
The menus and options can be
value and automatically return to
selected via the buttons on the
the previous display screen
instrument panel.
Alternatively, press and hold the
SETq button to return to the
previous display screen without
and a Multifunction version with
saving changes to the current menu
further adjustable settings.
option.
Some of the displayed functions differ
Note
when the vehicle is being driven or at
The settings menu is exited
a standstill. Some options are only
automatically after a delay. Only
available when the vehicle is being
changes already confirmed by
driven.
briefly pressing the SETq button
are stored.
Depending on variant, the following
items appear in the display:
■ Odometer, trip odometer 3 67
■ Clock 3 63
■ Outside temperature 3 63
■ Headlight range adjustment
3 89
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
81
Settings menu options -
After accessing this menu option,
activate or deactivate the function
Standard version
(set to On or Off) and confirm.
The settings menu contains the
following options:
Press the SETq button when
activated (On) to access the current
■ ILLU
set speed. Adjust as required and
■ SPEEd
confirm.
■ HOUR
Warning chimes 3 85.
■ UNIT
HOUR (Setting the clock)
■ bUZZ
Adjust the hours setting (flashing
■ BAG P
value) and confirm. Adjust minutes
Press the R button to scroll up the
■ DRL
setting (flashing value) and confirm.
screen and the menu options or to
Clock 3 63.
ILLU (Brightness of interior lighting)
increase the displayed value. Press
and hold to increase value rapidly
When driving at night with the low
UNIT (Unit of measurement)
(press again to stop on the required
beam on, adjust the brightness of the
Set the unit of measurement to km or
value).
vehicle's interior lighting (e.g.
miles.
instrument panel, climate control
Press the S button to scroll down the
display).
bUZZ (Warning chime volume)
screen and the menu options or to
Adjust the volume of warning chimes
decrease the displayed value. Press
SPEEd (Speed limit warning chime)
and confirm. 8 volume levels are
and hold to decrease value rapidly
Activate or deactivate the speed limit
available.
(press again to stop on the required
warning chime or change the speed
value).
A chime is also sounded every time
limit. Speeds between 20 and
the SETq, R or S button is pressed.
125 mph can be stored.
Warning chimes 3 85.
When activated, the driver is alerted
with a warning chime when the set
speed limit is exceeded.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
82
Instruments and controls
BAG P (Passenger front and side
DRL (Daytime running lights)
■ Passenger airbag
airbags activation/deactivation)
Activate the daytime running lights to
■ Daytime running lights
Activate the front passenger airbags
increase visibility of the vehicle during
■ Exit menu
if an adult is occupying the front
daylight (set to On). Deactivate when
passenger seat. Deactivate airbags
not required (set to Off).
LIGHTING (Brightness of interior
when a child restraint system is
Daytime running lights 3 89.
lighting)
installed on this seat.
When driving at night with the low
Settings menu options -
beam on, adjust the brightness of the
9 Danger
Multifunction version
vehicle's interior lighting (e.g.
The settings menu contains the
instrument panel, climate control
Risk of fatal injury for a child using
following options:
display).
a child restraint system on a seat
■ Lighting
It is also possible to adjust the
with activated front passenger
brightness using the R or S buttons
airbag.
■ Speed beep
without accessing the settings menu.
Risk of fatal injury for an adult
■ Trip B data
person on a seat with deactivated
SPEED BEEP (Speed limit warning
■ Set time
front passenger airbag.
chime)
■ Set date
Activate or deactivate the speed limit
After accessing this menu option,
■ Radio info
warning chime or change the speed
activate or deactivate the airbags
■ Autoclose
limit. Speeds between 20 and
(BAG P On or BAG P Off) and
125 mph can be stored.
■ Unit of measurement
confirm; a confirmation message
When activated, the driver is alerted
appears in the display. Select YES (to
■ Language
with a warning chime when the set
confirm changes) or No (to cancel
■ Warning volume
speed limit is exceeded.
changes).
■ Button volume
After accessing this menu option,
Airbag deactivation 3 45.
■ Seat belt buzzer
activate or deactivate the function
■ Service
(set to On or Off) and confirm.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
83
Press the SETq button when
SET DATE
Select Distance and confirm. Set the
activated (On) to access the current
Adjust the year setting (flashing
unit of measurement to km or mi
set speed. Adjust as required and
value) and confirm. Adjust month
(miles) and confirm.
confirm.
setting (flashing value) and confirm.
Select Consumption and confirm.
Warning chimes 3 85.
Adjust the day setting (flashing value)
When the Distance unit is set to km, it
and confirm.
is possible to set the unit of
TRIP B DATA
measurement for fuel consumption to
RADIO INFO (Display audio and
Activate or deactivate the second trip
either l/100km or km/l. When the
radio information)
computer (set to On or Off).
Distance unit is set to mi (miles), fuel
Activate radio info (set to On) to
Trip B records average consumption,
consumption is shown in mpg.
display audio and radio information
distance travelled, average speed
Select Temperature and confirm. Set
(e.g. station frequency, RDS
and travel time (driving time). The
the unit of measurement to °C or °F
messages, track number). Deactivate
measurement can be restarted at any
and confirm.
when not required (set to Off).
time. Trip computer 3 86.
LANGUAGE (for Display messages)
AUTOCLOSE (Automatic central
SET TIME (Setting the clock and
Display messages can be shown in
locking when driving)
clock mode)
different languages, including:
Activate the autoclose feature (set to
After accessing this menu option, it is
English, German, French, Italian,
On) to automatically lock the doors
possible to either set the time or
Portuguese, Spanish, Dutch, Polish
when vehicle speed exceeds
change the clock mode between 12
and Turkish. Select desired language
12 mph. Deactivate when not
hour and 24 hour clock.
and confirm.
required (set to Off).
Select Time and confirm. Adjust the
WARNING VOLUME (Warning chime
hours setting (flashing value) and
UNIT OF MEASUREMENT (for
volume)
confirm. Adjust minutes setting
Distance, Fuel consumption and
Adjust the volume of warning chimes
(flashing value) and confirm.
Temperature)
and confirm. 8 volume levels are
After accessing this menu option, it is
Select Mode and confirm. Select
available.
possible to set the unit of
12h or 24h and confirm.
measurement for distance, fuel
Warning chimes 3 85.
Clock 3 63.
consumption and temperature.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
84
Instruments and controls
BUTTON VOLUME
The distance to next service is also
confirm; a confirmation message
A chime is sounded every time the
displayed automatically when the
appears in the display. Select YES (to
SETq, R or S button is pressed.
distance reaches 1,250 miles and is
confirm changes) or No (to cancel
repeated after every additional
changes).
Adjust the volume of these chimes
125 miles.
and confirm. 8 volume levels are
Airbag deactivation 3 45.
available.
Service display 3 70.
DAYTIME RUNNING LIGHTS
Warning chimes 3 85.
PASSENGER AIRBAG (Passenger
Activate the daytime running lights to
front and side airbags activation/
increase visibility of the vehicle during
SEAT BELT BUZZER (Reactivate
deactivation)
daylight (set to On). Deactivate when
warning chime for driver and/or front
Activate the front passenger airbags
not required (set to Off).
passenger seat belt reminder)
if an adult is occupying the front
This menu option is available only
Daytime running lights 3 89.
passenger seat. Deactivate airbags
when the seat belt reminder has
when a child restraint system is
EXIT MENU
already been deactivated by a
installed on this seat.
Select this menu option to exit the
workshop.
settings menu.
When reactivated, the driver and/or
9 Danger
front passenger are alerted with a
warning chime when the
Risk of fatal injury for a child using
corresponding seat belt is not
a child restraint system on a seat
fastened.
with activated front passenger
Seat belt reminder 3 73.
airbag.
Risk of fatal injury for an adult
SERVICE (Distance to next service)
person on a seat with deactivated
Access this menu option to view the
front passenger airbag.
remaining distance to the next
service.
After accessing this menu option,
activate or deactivate the airbags
(Bag Pass On or Bag Pass Off) and
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
85
■ If a transmission fault is detected in
To reset the fuel cut-off system and
Vehicle messages
vehicles with manual transmission
enable the vehicle to be driven, refer
automated.
to "Vehicle shutdown" 3 103.
Warning chimes
■ If a warning message appears in
Only one warning chime will sound at
the Driver Information Centre.
a time.
The warning chime regarding
When the vehicle is parked
unfastened seat belts has priority
and/or the driver's door is
over any other warning chime.
opened
■ When the key is in the ignition
When starting the engine or
switch.
whilst driving
■ Vehicles with manual transmission
■ If seat belt is not fastened.
automated; neutral is not selected,
■ If a certain speed is exceeded with
the parking brake is not applied, or
the parking brake applied.
the foot brake and/or the
■ If the parking assist detects an
accelerator pedal has not been
object.
depressed.
■ If a fault is detected in the parking
assist.
Fuel system messages
■ If a door or the tailgate is not fully
closed when starting-off.
Fuel cut-off system
■ If the vehicle speed briefly exceeds
In the event of a collision of a certain
a set limit.
severity, the fuel system is cut-off and
the engine is switched off
■ Vehicles with manual transmission
automatically, for safety reasons. A
automated; neutral is not selected
corresponding warning message may
or the foot brake has not been
also appear in the Driver Information
depressed.
Centre 3 79.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
86
Instruments and controls
■ Distance travelled
Trip B can be deactivated via the
Trip computer
Driver Information Centre 3 79.
■ Average speed
The trip computer provides
■ Travel time (driving time)
Reset trip computer information
information on driving data, which is
To reset the trip computer, select one
continually recorded and evaluated
Multifunction version
of its functions, then press and hold
electronically.
Two trip odometers, Trip A and Trip
the TRIP button for a few seconds.
B, are available for selection and are
recorded separately.
The information of the two trip
computers can be reset separately,
making it possible to display different
trip distances.
Trip A
■ A verage consumption
■ Instantaneous consumption
■ Range
■ Distance travelled
The following functions can be
■ Average speed
The following trip computer
selected by pressing the TRIP button
■ Travel time (driving time)
information will be reset:
repeatedly on the end of the wiper
lever:
■ Average consumption
Trip B
■ Distance travelled
■ A verage consumption
Standard version
■ Average speed
■ Average consumption
■ D istance travelled
■ Travel time (driving time)
■ Instantaneous consumption
■ A verage speed
■ Range
■ Travel time (driving time)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
87
The trip computer will reset
After refuelling, the range is updated
The measurement can be restarted at
automatically when the maximum
automatically after a brief delay.
any time.
value of any of the parameters is
The measurement can be restarted at
exceeded.
Exit trip computer
any time.
To exit the trip computer, press and
Average consumption
Note
hold the SETq button for more than
The range will not be displayed if the
Average consumption is displayed,
2 seconds.
vehicle is left parked with the engine
taking into consideration the distance
Driver Information Centre 3 79.
running for a long time.
travelled and the fuel used since the
last reset.
Distance travelled
Interruption of power supply
The measurement can be restarted at
Displays the distance driven since the
If the power supply has been
any time.
last reset.
interrupted or if the battery voltage
has dropped too low, the values
The measurement can be restarted at
Instantaneous consumption
stored in the trip computer will be lost.
any time.
Display of the instantaneous fuel
consumption.
Average speed
_ _ _ _ will appear in the display if the
The average speed since the last
vehicle is left parked with the engine
reset is displayed.
running for a long time.
The measurement can be restarted at
any time.
Range
Interruptions in the journey with the
The range is calculated from the
ignition off are not included in the
current contents of the fuel tank and
calculations.
the average consumption since the
last reset.
Travel time (driving time)
When the range is less than 30 miles,
The time elapsed since the since the
_ _ _ _ will appear in the display.
last reset is displayed.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
88
Lighting
Lighting
Exterior lighting
High beam
Light switch
Exterior lighting
88
Interior lighting
91
Lighting features
94
To switch from low to high beam,
push lever.
Turn light switch:
To switch to low beam, pull lever.
§ = off / daytime running lights
9 = sidelights / headlights
Headlight flash
Control indicator 8 3 78.
To activate the headlight flash, pull
lever.
Tail lights
Tail lights are illuminated together
with headlights and sidelights.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст